Looking for:

Windows 10 Recovery Tools Guide and Free Download |

Click here to Download


It will ensure the computer can boot after restoration. A problem occurred while creating the recovery drive “. Don’t worry, and get corresponding solutions below. If you do not want to download an unofficial file, then you can try following solutions.

Another likely cause of this problem is that Windows recovery environment is disabled. After that, you should be able to boot into recovery environment. If this also fails, you can turn to Solution 3. The Recovery folder is hidden by default. To show it, you can:. From there, check the option Show hidden files, folders, and drives , and uncheck the option Hide protected operating system files Recommended.

From this step to Step 4, you will create a Winre. If you do not have one, you can download installation ISO file from Microsoft. Then, double-click to mount it as a virtual drive. In the Source folder, locate the file Install. Copy the Install. Read our guide to enter the BIOS. Your computer will boot from your newly created Windows 10 bootable USB drive.

You may now repair your computer or install a fresh version of Windows 10 using this drive. This creates the exact same drive that the methods outlined above do; the requirements still remain the same, though. Check the box of USB flash drive and click Next to go on. Step 8: Media Creation Tool is downloading Windows This can take some time, so wait patiently.

Step A few minutes later, the bootable USB recovery drive is created. Click Finish to exit the tool. After getting the Windows 10 recovery USB drive, how can you restore your system from the drive that is created on another computer?

Here is how to restore Windows 10 from the recovery USB. Make a choice based on your actual situation and follow the on-screen instructions to finish the remaining steps. In Windows 10, there is a feature called Create a recovery drive. Use an empty USB flash drive or make sure to transfer any important data from your USB flash drive to another storage device before using it to create a USB recovery drive.

Swipe in from the right edge of the screen, and then tap Search. If you’re using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, and then click Search. Enter recovery drive in the search box, and then select Create a recovery drive. After the recovery drive tool opens, make sure the Copy the recovery partition from the PC to the recovery drive check box is selected, and then select Next.

The recovery drive will include only the recovery tools and a bootable image, but not a recovery image to use for refreshing or resetting your PC. Select the USB drive you’d like to use for your recovery drive, then select Next. Select Create.

The recovery image and necessary recovery tools will be copied to your USB flash drive, which will take a while, depending on your PC and the size of the recovery image. This is now your Windows 8. Keep it in a safe place and don’t use it to store other files or data. Sign in with Microsoft. You’re signed in. You have multiple accounts. Support for Windows 8. Need more help? Join the discussion. Was this information helpful? Yes No.


Windows 10 home recovery usb free


You can use them to repair or troubleshoot the unbootable computer, restore your computer to factory settings, or directly install Windows on it. And you can get it by the following methods:. Please keep reading below and learn 3 easy ways to complete this. Here you will create a recovery drive in Windows 10 with built-in tool – Recovery Drive, and then use it to restore or completely reinstall Winodws Please prepare a USB drive with 16GB at least, otherwise this operation may fail because of insufficient disk space and throw you an error message, saying, “we can’t create the recovery drive”.

And these steps also apply to Windows Learn more below. Please backup your important files in advance, whether it is pictures, documents, audios, or videos, otherwise your data will go forever. Step 1. Connect the USB drive to your computer, and make sure it can be detected. Then, type Create a recovery drive in the search box and select it from the top result. Step 2. Check the back up system files to the recovery drive option and hit Next.

If not, you will not see Reset this PC and Recover from a drive in the system recovery environment. Note: The Back up system files to the recovery drive gives you a chance to perform Windows 10 install when you cannot troubleshoot your computer with other recovery tools, such as, System Restore, Startup Repair, Command Prompt, etc.

Step 4. Here you will use the “System Restore” feature in the recovery environment to recover Windows 10, and It will keep all your files at the point you make a system restore point. This is also true for Windows Boot from Windows 10 repair disk created earlier In the initial page, select keyboard layout and other preferences. In the Choose an option window, select Troubleshoot and then Recover from a drive.

Step 3. Select Just remove my files or Clean the drive fully , depending on what you want to keep. Click Recover to recover from a drive. It will take a while to finish this process and your PC will restart automatically. In the Troubleshoot page, select Advanced options and then System Restore. Select a restore point to restore Windows 10 to an earlier working date and click Next.

The “Recovery Drive” feature is very useful if you created one when your computer works well. You can use it to repair or reinstall Windows 10 with the above steps. But it still has some limitations. The biggest one is that you can only use it on the current computer where you created it. For example, you cannot use a Windows 10 bit recovery drive to repair Windows 10 bit. In this case, you can try Method 2. Then, try the following steps:.

Download Windows 10 Media Creation tool from Microsoft and run it with administrator priority. Then, it will start to check the hard drive of your computer and get a few things ready. After that, you will be asked to read all the license terms and click Accept to agree with it. In the “What do you want to do? Step 5. It will start to create Windows 10 reinstall USB, you just need to wait untill the process completes. Connect the installation USB drive to your computer and boot from it.

In the initial Windows Setup window, select language, editions and other preferences. Then, click Next until you see Repair your computer option, select it. Then, select Custom installation type and follow on-screen instructions to complete the installation process. In the Restore system files and settings window, click Next and then follow the on-screen instructions to complete the System Restore process.

You can choose either bit or bit system according to your computer. It works fine on the same Windows version, but if you use the installation disc created on Windows 10 to Windows 11, it becomes useless.

In this case, you can try Method 3. Here you will restore system image from USB drive in Windows 10 for disaster recovery. Compared with “Recover from a drive” or “System Restore”, using a Windows 10 system image will be a better choice. Because it will keep it as it is after restore, including the operating system, boot partitions, system files, installed programs, personal data, etc.

And you can achieve this goal in the following 2 ways. Then, which way should you use? You can use the first way if have a recovery USB and system image backup created by the computer you want to restore.

Also, you need a larger hard drive to receive the backup image, otherwise the restore process will fail. For detailed steps, please refer to restore Windows 10 system image to new hard drive.

If you don’t have any of them, it’s suggested to backup and restore system with free backup software like AOMEI Backupper Standard due to the following advantages:. If you create Windows 11 bootable USB , it can be used on all the previous systems. Tip: If your computer currently is running smoothly without any obstacles, it’s suggested to schedule backup system , so the newly changed files and installed apps will be included in this image.

Now, you have already prepared a Windows 10 system repair USB and system image backup for your computer. Then, you can restore Windows 10 system image using the following steps.

This also applies to Windows Connect bootable USB and hard drive containing system image backup to your computer. Then restart your computer, press F2 or other specific keys to enter BIOS, and set boot priority for created Windows 10 repair disk.

At last, save changes and reboot. Notes: The program automatically selects the original system drives as the destination partitions.

If the original system drives are not detected, you may be asked to select a destination path manually. In this condition, you should select the first partition on the target disk, or the system could not boot from it. In the Operation Summary window, click Start Restore and it will start to reinstall Windows 10 from a system image. After the restoration process is done, your computer works again and it’s exactly the same as before.

Note: If you are currently transferring OS from one computer to another with different hardware, such as, CPU or motherboard, it’s suggested to use ” Universal Restore ” feature.

But it is available at least on the Professional version. But you are risk at losing your files or programs if you don’t have a system image. If you have one, you can easily restore system image to a larger drive with a recovery disk. If the destination disk is smaller, the system restore will fail.

In this case, you’d better use a reliable backup and restore to recover. And its advanced version still allows you to restore system to different computer. What is a recovery USB? And you can get it by the following methods: Create a Windows 10 recovery disk with the Recovery Drive feature. Use installation disc comes along with your computer.

Download Media Creation tool and create one with it. Create a Windows 10 recovery drive with built-in tool Step 1. Select USB flash drive and hit Next. Restore Windows 10 from a recovery drive Here you will use the “System Restore” feature in the recovery environment to recover Windows 10, and It will keep all your files at the point you make a system restore point. After that, you just need to set up your Windows 10 with the on-screen instructions.

Boot from the Windows 10 recovery USB. In the Restore system files and settings window, click Next. Confirm the info and click Finish to recover Windows Way 2: Use a third-party backup and restore software. You can easily restore system image to smaller drive with secure boot if you want. You can restore Windows 10 image to new computer, even if it has different hardware. Now, follow the steps below to restore Windows 10 image from USB recovery drive. Do you need any more help?

Have you solved your problem? Otherwise, enter the query in the search box below.


Windows 10 home recovery usb free

Startup Repair can recovedy fix certain problems, such as missing or damaged system files. To make sure you windows 10 home recovery usb free boot your PC when it fails to start, you need to create a recovery drive. Any additional feedback? How to boot from the created recovery CD? Undelete partitions. When the removal is done, select Finish. You may be asked if you want to allow this app to make changes to приведенная ссылка device, please click “Yes”.


Deixe uma resposta

O seu endereço de email não será publicado. Campos obrigatórios marcados com *